Translate this page

Pages are written in English and translated in your browser by machine translation. Test results and your data are never sent anywhere.

Mic Test: Check Your Microphone Online

See your voice as a live waveform, check the level and background noise, and record a clip to hear how you sound.

Runs locally in your browser. Nothing is uploaded. Your browser will ask for microphone access when you press start.

Press start and allow microphone access when your browser asks. The sound is analysed on this device and is never uploaded or saved unless you download it.

Results

Speak to check your level
Peak now–dBFS
Loudest, last 4 s–dBFS
RMS–dBFS
Clipping0
Background noise–
Format–
Report a problem

A mic test shows whether your microphone sends sound to your computer, how loud that sound is, and how much background noise comes with it. This one draws your voice as a live waveform, measures the level in dBFS, flags clipping, and lets you record and play back a clip, all inside your browser.

7 chapters · 5 min read

How to use the mic test

1 min
  1. Press Start mic test. Your browser asks for permission; choose Allow.
  2. If you have several microphones, pick the one you want from the menu. Headsets, webcams and laptops often each have their own.
  3. Talk at the volume you use on calls. The waveform moves and the meter fills as you speak.
  4. Read the verdict next to Results. Good level means your loudest moments land in the green zone on the meter.
  5. Press Measure background noise and stay silent for a moment. The test reports how loud the room is when you are not talking.
  6. Press Record a clip, say a sentence, and play it back. This is the quickest way to hear echo, hiss, or a muffled sound.
  7. Press Stop microphone when you are done. The browser’s microphone indicator turns off.

How the microphone test works

1 min

When you allow access, the browser gives this page a live audio stream from your microphone. The test connects that stream to an analyser that reports the shape of the sound wave thousands of times per second. Nothing is played back to your speakers while you test, so there is no feedback howl.

From each short slice of audio the test computes:

  • Peak level: the loudest single sample, shown in dBFS. The thin white line on the meter holds the recent peak for a moment so you can read it.
  • RMS level: the average energy of the slice, which tracks how loud the sound feels better than the peak does.
  • Clipping: any sample at or near full scale. Clipped audio is flattened at the top and sounds harsh.
  • Spectrum: the bars below the waveform split the sound into frequency bands from low (left) to high (right), so you can see bass, voice and hiss.

The verdict uses the loudest moment in the last four seconds, so a pause between sentences does not flip it to “too quiet”.

How to read your mic test results

1 min
ReadingWhat it meansWhat to do
No sound detectedNothing above the noise reaches the browser.Check mute switches, the selected device, and your system input volume.
Too quiet (below -40 dBFS)Others will struggle to hear you.Raise the input volume, move closer to the mic, or turn on automatic gain.
A bit quiet (-40 to -24 dBFS)Usable, but quieter than most people on a call.Raise the input volume a few steps.
Good level (-24 to -3 dBFS)Clear, with headroom for loud moments.Nothing to change.
Too loud or clippingYour voice will distort when you laugh or shout.Lower the input volume or move the mic back a little.
Background noise: LoudFans, traffic or hum sit close to your voice level.Turn on noise suppression, move away from the noise, or use a headset mic.

These bands are the site’s practical guide for calls and voice chat. They are explained, with the reasoning behind each number, on the methodology page.

Common microphone problems and fixes

1 min

The browser picks the wrong microphone. Choose the right one from the device menu. To change the default for every site, open your system sound settings and set the input device there.

Your mic works here but not in Discord, Zoom or Teams. Each app keeps its own input setting. Open the app’s voice or audio settings and select the same microphone you used here. Our guide to fixing a mic that does not work in Discord walks through every setting.

The level is low even when you speak loudly. On Windows, open Sound settings, choose your microphone, and raise the input volume. Some mics also have a “boost” option in the older Control Panel sound dialog. Read mic too quiet on Windows 11 for the full steps.

You hear a hum or buzz in the recording. That is often electrical noise from a USB port, a laptop charger, or a cable near a power supply. Try another port, unplug the charger for a moment, or use a USB hub with its own power.

The sound cuts in and out. Wireless headsets switch to a lower-quality mode when the microphone is in use, and a weak Bluetooth link drops audio. Move closer to the computer or use a wired connection.

Permission was blocked. If you clicked Block by mistake, the test shows step-by-step instructions for your browser and system to allow it again.

Tips for specific microphones

1 min

USB and gaming headsets usually have a mute switch on the cable or a flip-up boom that mutes when raised. Check both before anything else.

Laptop built-in mics pick up keyboard noise and fans. Noise suppression helps a lot; an external headset helps more.

XLR microphones with an audio interface need gain set on the interface itself. Aim for peaks around -12 dBFS here, and make sure phantom power is on for condenser mics.

Webcam microphones sit far from your mouth and capture more room echo. Record a clip to judge whether they are good enough for meetings.

Microphone terms in plain English

1 min
  • dBFS: decibels below full scale, the loudest level digital audio can store.
  • Clipping: sound louder than full scale, which gets cut flat and distorts.
  • Noise floor: the level of the background when nobody is talking.
  • Gain: how much the signal is amplified before it is recorded.
  • Echo cancellation: removes the sound of your own speakers from the mic signal.
  • Sample rate: how many times per second the sound is measured, usually 44.1 or 48 kHz.

Checking the rest of your call setup? Run the webcam test and the speaker test, or try the full Rig Check that walks through every device. The home page explains how all the tests fit together.

Fix guides for common problems

1 min

Frequently asked questions

How do I test my microphone online?

Press Start mic test on this page and allow access when your browser asks. Speak normally. If the waveform moves and the level meter rises when you talk, your mic works. Record a clip and play it back to hear the quality. Nothing is uploaded.

Why does my mic test show no sound?

The browser may be using a different microphone than the one you are speaking into, the mic may be muted with a hardware switch, or your system input volume may be at zero. Pick the right device from the menu, check for a mute button on the headset or cable, and raise the input level in your sound settings.

What is a good microphone level?

For calls and voice chat, aim for your loudest words to peak between about -24 and -6 dBFS. Lower than -40 dBFS sounds too quiet to others; peaks at 0 dBFS clip and distort. These are practical targets, not a broadcast standard.

What does dBFS mean?

Decibels relative to full scale. 0 dBFS is the loudest level digital audio can hold, so every real reading is negative. -6 dBFS is about half the maximum amplitude, and -60 dBFS is very quiet.

Is this mic test private?

Yes. The sound is analysed by code running in your browser. It is not sent to any server, and recordings stay on your device unless you download them yourself. When you stop the test or leave the page, the microphone is released.

Why does my voice sound different in the recording than in Discord or Zoom?

Each app applies its own processing. This test lets you switch the browser's echo cancellation, noise suppression and automatic gain on and off so you can hear what each one does. Apps like Discord and Zoom add more of their own on top.

Can I test my microphone on my phone?

Yes. The test works in current mobile browsers. On iPhone, use Safari or Chrome and allow microphone access when asked. Phones apply strong processing, so levels can look different from a computer.

Why does the level jump up and down by itself?

That is usually automatic gain control raising the volume during quiet moments. Turn off Automatic gain in the processing options to see your real, unadjusted level.

Sources

  1. MDN Web Docs: MediaDevices.getUserMedia()
  2. MDN Web Docs: AnalyserNode
  3. MDN Web Docs: MediaRecorder
  4. MDN Web Docs: MediaTrackConstraints (echoCancellation, noiseSuppression, autoGainControl)
  5. Wikipedia: dBFS

Written and tested by Kamel Medlej

Founder and editor of PC Hardware Tester. Tools are checked on real hardware, and each page says exactly what it was tested on. Spot a mistake? Tell us.

Last updated Published Tested on Chromium-based browser on Windows 11 with a USB headset microphone, during development. Other browsers and devices are added here as they are checked.