Translate this page

Pages are written in English and translated in your browser by machine translation. Test results and your data are never sent anywhere.

Audio

Mic Too Quiet on Windows 11? 9 Ways to Make It Louder

Microphone too quiet on Windows 11? Measure your level in dBFS, then raise input volume, enable mic boost, fix app settings and placement for a clear voice.

By Updated 3 min read

A microphone on a desk with a low level meter beside it
Test it now: Mic Test (live waveform, levels, noise and playback)

If your mic is too quiet on Windows 11, first measure it: speak into our mic test and look at the peak level. Then raise Input volume in Sound settings, turn up Microphone Boost in the classic Sound control panel, check the volume inside the app you use, and move the microphone closer. Most quiet mics are fixed by the first two steps.

11 chapters · 3 min read

Step 1: Measure how quiet it is

1 min

Open the mic test, press start and speak at your normal volume. Look at Loudest, last 4 s:

Your peakVerdictWhat to do
Below -40 dBFSToo quietSteps 2 to 4, then placement.
-40 to -24 dBFSA bit quietStep 2 is usually enough.
-24 to -6 dBFSGoodYour mic is fine; check the app.

Measuring first tells you whether the problem is Windows (quiet everywhere) or one app (quiet only there).

Step 2: Raise Input volume in Settings

1 min
  1. Open Settings > System > Sound.
  2. Under Input, choose your microphone.
  3. Raise Input volume. Start at 80 to 100.
  4. Press Start test on the same page and speak.

Make sure the right microphone is the default input. Webcams and monitors often add their own mics that Windows may pick instead.

Step 3: Turn up Microphone Boost

1 min

Boost is a hardware amplifier on many sound chips and is hidden in the classic control panel.

  1. On the Sound settings page, select More sound settings to open the classic Sound window.
  2. Go to the Recording tab, double-click your microphone.
  3. Open Levels.
  4. Raise Microphone Boost to +10 dB, test, and go higher only if needed.

Not every device has boost. USB microphones and headsets usually do not; their gain is set in their own software or on the device.

Step 4: Check enhancements and exclusive mode

1 min

In the same Properties window:

  • Advanced tab: untick Allow applications to take exclusive control if another app is lowering the level.
  • Enhancements or Advanced tab: some drivers add noise suppression that can make voices very quiet. Turn enhancements off, test, and turn them back on if they were helping.

On Windows 11, Settings > System > Sound > your mic > Audio enhancements may also list “Voice clarity” or similar effects.

Step 5: Turn off communications ducking

1 min

In the classic Sound window, the Communications tab can lower sounds when Windows detects a call. Set it to Do nothing. This affects playback volume more than the mic, but it often explains “everything gets quiet when I talk”.

Step 6: Raise the level inside your app

1 min

Discord, Zoom, Teams, OBS and games have their own input volume and their own choice of device. Select the right mic and raise its volume. Turn on automatic gain or “automatically adjust microphone volume” if offered. For Discord specifically, see mic not working on Discord.

Step 7: Fix microphone placement

1 min

Distance matters more than any setting. Halving the distance between your mouth and the microphone raises the level by about 6 dB.

  • Headset boom: two finger-widths from the corner of your mouth.
  • Desk or USB mic: 10 to 20 cm away, pointed at your mouth. Check which side is the front.
  • Laptop mic: sit closer to the laptop, and keep fans clear.

Step 8: Update or reinstall the audio driver

1 min

Open Device Manager, expand Audio inputs and outputs, right-click your mic and choose Update driver. For built-in audio, download the latest driver from your PC or motherboard maker’s support page, which is often better than the generic one.

Step 9: Check the hardware

1 min
  • Make sure the plug is fully inserted and in the pink mic jack, not the green headphone jack.
  • Try another USB port and another computer.
  • Condenser mics on an audio interface need phantom power and gain set on the interface.

Too loud instead?

1 min

If the mic test shows clipping, lower Input volume or boost until your loudest moments stay below -6 dBFS.

After every change, return to the mic test and record a clip to hear the difference. More audio help: one headphone side not working. All tests are on the home page.

Tools for this problem

1 min
  • Mic Test: Live waveform, levels, noise and playback.

Frequently asked questions

How do I make my mic louder on Windows 11?

Open Settings > System > Sound, choose your microphone under Input, and raise Input volume. Then open the older Sound control panel, go to Recording > your mic > Properties > Levels, and raise Microphone Boost if it is available.

What level should my microphone be?

For calls and voice chat, aim for your loudest words to peak between about -24 and -6 dBFS in the mic test. Below -40 dBFS sounds too quiet.

Why is my mic quiet only in some apps?

Each app has its own input volume and may use a different device. Check the input settings in Discord, Zoom, Teams or your game, and turn on automatic gain if the app offers it.

Does Microphone Boost add noise?

Yes, boost raises background noise along with your voice. Use the lowest boost that works, and combine it with noise suppression.

Why did my mic get quieter after an update?

Updates can reset input levels or replace the audio driver. Recheck the input volume, boost and enhancements, and install the latest driver from your PC or motherboard maker.

Sources

  1. Microsoft Support: Fix microphone problems
  2. Wikipedia: dBFS

Written and tested by Kamel Medlej

Founder and editor of PC Hardware Tester. Tools are checked on real hardware, and each page says exactly what it was tested on. Spot a mistake? Tell us.

Last updated Published