Translate this page

Pages are written in English and translated in your browser by machine translation. Test results and your data are never sent anywhere.

PS5 Controller Tester for PC and Mac

Plug in or pair your DualSense and press any button. Check buttons, trigger travel, the touchpad click and both sticks.

Runs locally in your browser. Nothing is uploaded.

Connect a controller and press any button

Browsers only show a controller after you press a button on it, for privacy. Plug it in with USB or pair it over Bluetooth, then press A, Cross, or any face button.

  1. Open Settings > Bluetooth & devices and check the controller is listed as connected.
  2. For a wired pad, try another USB port and a data cable (some cables only charge).
  3. Close Steam or set Steam Input to off for this browser if buttons do not show up.

The PS5 controller tester checks a DualSense on your computer: every face button, the D-pad, L1, R1, both analog triggers, both sticks and their clicks, the Create and Options buttons, the PS button and the touchpad click. It uses a PlayStation-style layout with symbols on the face buttons, so you can match what you press with what you see.

5 chapters · 2 min read

How to test a PS5 controller

1 min
  1. Connect it. A USB-C cable that carries data is the most reliable. For Bluetooth, hold Create and the PS button until the light bar blinks fast, then pair it in your computer’s Bluetooth settings.
  2. Wake it. Press Cross or any button. The drawing appears with the controller’s name.
  3. Press everything. Cross, Circle, Square, Triangle, the D-pad, L1, R1, L3 and R3 (stick clicks), Create, Options, PS and the touchpad click. The counter shows what is left.
  4. Check the triggers. Pull L2 and R2 slowly. The bars should rise smoothly and reach 100%.
  5. Check for drift. Put the controller down, press Measure stick drift, and wait three seconds.
  6. Check stick range. Run the circularity check on each stick.

What makes the DualSense different

1 min

The DualSense has analog triggers with motors that can push back (adaptive triggers), a touchpad that also clicks, a microphone, and fine haptic motors instead of classic rumble. Web pages can read the buttons, triggers and sticks through the standard mapping, and in Chrome and Edge they can usually play a basic rumble. The adaptive trigger resistance, the touchpad’s finger position, and the built-in microphone are not exposed to browsers, so those need a game or the console to test.

PS5 stick drift: what the numbers mean

1 min

Stick positions run from -1 to 1 on each axis. A resting stick rarely reads exactly zero; a tiny offset is normal. The drift check reports the largest distance from center while untouched:

Idle readingVerdict
Under 0.08Fine. Games’ dead zones hide this completely.
0.08 to 0.24Early drift. Games with small dead zones may creep.
Over 0.24Clear drift that most games will notice.

If you see drift, try blowing compressed air around the base of the stick while rotating it, update the controller firmware on a console, and check your warranty. The stick drift guide covers each fix in order, from cleaning to replacement.

Common DualSense problems on PC

1 min

It connects but no buttons show. Steam may be grabbing the controller. Quit Steam fully, reload this page and press a button.

It keeps disconnecting over Bluetooth. Charge it, keep it close to the receiver, and avoid placing a USB 3 device right next to your Bluetooth adapter.

Buttons are labeled with numbers. Your browser may not apply the standard mapping to this connection. The test still shows each button working; Bluetooth and USB can map differently in some browsers.

Using a different pad? Try the main controller tester or the Xbox controller tester. The home page lists every hardware test.

PlayStation, DualSense and PS5 are trademarks of Sony Interactive Entertainment. This site is not affiliated with or endorsed by Sony, and the controller drawing is an original generic design.

Fix guides for common problems

1 min

Frequently asked questions

How do I test my PS5 controller on PC?

Connect the DualSense by USB-C or Bluetooth, open this page, and press any button. Every button, both triggers and both sticks show live. Then run the drift check with your hands off the sticks.

How do I pair a PS5 controller to a PC over Bluetooth?

Hold the Create button and the PS button together until the light bar flashes quickly, then choose the controller in your computer's Bluetooth settings. It may appear as Wireless Controller.

Can I test PS5 stick drift here?

Yes. Press Measure stick drift and do not touch the sticks for three seconds. The test reports the largest movement of each stick. Readings above 0.08 suggest early drift; above 0.24 most games will notice.

Does the touchpad show up?

The touchpad click usually appears as its own button in Chrome and Edge. Touch position and the adaptive trigger effects are not available to web pages.

Does vibration work with a DualSense in the browser?

In Chrome and Edge, the basic rumble usually works. The fine haptics and adaptive triggers of the DualSense need the console or game support and cannot be tested here.

Sources

  1. W3C: Gamepad specification (standard mapping)
  2. MDN Web Docs: Using the Gamepad API
  3. PlayStation Support: Pair a DualSense wireless controller

Written and tested by Kamel Medlej

Founder and editor of PC Hardware Tester. Tools are checked on real hardware, and each page says exactly what it was tested on. Spot a mistake? Tell us.

Last updated Published Tested on Layout and button names checked against the W3C standard mapping during development. Testing with a physical DualSense controller is pending and will be listed here once done.