This hearing test is a simple screening you can do with headphones in about five minutes. It plays quiet tones in one ear at a time and finds the softest level you can hear at six frequencies, then draws an audiogram-style chart. It is for information only and does not replace a test by a licensed audiologist.
Not a medical test. This screening cannot diagnose hearing loss. If you notice sudden hearing loss, ringing, pain or dizziness, contact a doctor promptly. For any concern about your hearing, consult a licensed audiologist or doctor.
How to take the hearing screening
- Prepare. Sit somewhere quiet, close other apps that play sound, and turn off spatial audio, EQ and sound enhancements. Wired headphones are best.
- Calibrate once. Play the 1 kHz reference tone and set your system volume so it is clear and comfortable, about as loud as normal conversation. Do not change the volume again.
- Start. For each tone you hear three short beeps. They start very quietly and get a little louder each time.
- Respond. Press the big I hear it button, or the spacebar, as soon as you hear a beep, even a faint one.
- Switch ears. After six tones in your left ear, the test moves to your right ear.
- Read your chart. Save it as a PDF with Print if you want to show it to a professional.
How the screening works
The test follows the idea of an ascending method used in hearing screenings: tones start below what most people can hear and rise in 5 dB steps until you respond. The gaps between beeps vary at random so you cannot guess the rhythm. Each tone is generated by your browser and placed fully in one ear with a stereo panner.
The frequencies are 250, 500, 1000, 2000, 4000 and 8000 Hz, the range most important for understanding speech.
How to read your chart
The chart follows audiogram conventions: frequency runs left to right, and higher on the chart means you heard a quieter tone. Right-ear results are red circles, left-ear results are blue crosses.
Because a browser cannot know the true loudness of your headphones, the numbers are decibels below your own reference tone, not the calibrated dB HL a clinic uses. That makes the chart useful for two comparisons:
- Left versus right. The two lines should be similar. A gap of 15 dB or more at a frequency is worth noticing.
- Low versus high frequencies. Many people need higher levels at 4 and 8 kHz; high-frequency hearing changes naturally with age and noise exposure.
When to see a professional
Book a hearing test with an audiologist if you often ask people to repeat themselves, struggle in noisy places, turn the TV up more than others like, hear ringing (tinnitus), or if this screening shows one ear clearly weaker after you swapped your headphones around and tested again.
The World Health Organization and the U.S. National Institute on Deafness and Other Communication Disorders, linked below, publish clear information on hearing health and noise protection.
Protect your hearing
- Keep headphone volume at a level where you can still hear someone speaking near you.
- Take breaks during long listening sessions.
- Use hearing protection at concerts and with loud tools.
Related: check your gear with the headphone test and the left right sound test. The home page lists every audio test.
Fix guides for common problems
- One Side of My Headphones Is Not Working. How Do I Fix It?: Only one side of your headphones working? Run a left right test, then check balance, mono audio, the plug, Bluetooth pairing and the cable to fix it fast.
Full Rig Check