Translate this page

Pages are written in English and translated in your browser by machine translation. Test results and your data are never sent anywhere.

Ghosting Test: See Motion Blur and Overdrive Trails

Watch shapes move across the screen at a set speed. Trails behind them show ghosting; bright halos show overdrive overshoot.

Runs locally in your browser. Nothing is uploaded.

What to look for

Your display–Hz
Speed960px/s
Marker step at full rate–px
  • Ghosting: a faint copy or trail behind the marker, often darker or brighter than the background. It comes from slow pixel response; try your monitor's overdrive setting.
  • Inverse ghosting (overshoot): a bright or colored halo trailing the marker. Overdrive is set too high; step it down one level.
  • Motion blur: the whole marker looks soft when your eyes follow it. Higher refresh rates and backlight strobing (ULMB, ELMB, DyAc) reduce it.
  • Judder: the 2nd and 4th frame lanes jump in steps. That is how the same speed looks at half and a quarter of your frame rate.

Follow the top marker with your eyes, not the center of the screen. Compare the three backgrounds: many panels ghost more on dark-to-gray changes.

Read more: Is My Monitor Really Running at 144 Hz? How to Check and Fix It

The ghosting test moves the same marker across your screen in three lanes at a speed you choose. Follow it with your eyes to see trails, halos and smear. It is a quick way to tune your monitor’s overdrive setting and to see what your refresh rate does for motion clarity.

5 chapters · 2 min read

How to use the ghosting test

1 min
  1. Choose a speed. 960 pixels per second is a good start.
  2. Choose a background. Gray shows most problems; dark and light reveal others.
  3. Follow the top marker with your eyes. Do not stare at the center of the screen.
  4. Look behind the marker for a trail and around it for a bright or colored halo.
  5. Compare the three lanes: updated every frame, every 2nd frame and every 4th frame.
  6. Open your monitor’s menu, change the overdrive setting, and watch the effect live.

How it works

1 min

The marker moves a fixed number of pixels per second, timed from the display’s own frames so the motion stays even. On a 60 Hz screen at 960 pixels per second, the marker jumps 16 pixels each frame; at 144 Hz, about 7 pixels. Smaller jumps look smoother and blur less when your eyes track them.

The second and third lanes only update every second or fourth frame, which simulates a lower frame rate at the same speed. That makes the link between frame rate and motion clarity easy to see side by side.

What you might see

1 min
ArtifactLooks likeUsual causeFix
GhostingFaint trail behind the markerSlow pixel responseRaise overdrive one step.
Inverse ghostingBright or colored haloOverdrive set too highLower overdrive one step.
Motion blurWhole marker looks softSample-and-hold displayHigher refresh rate or a strobing mode.
JudderMarker jumps in stepsLow frame rateRaise frame rate or refresh rate.

Tips

1 min
  • Check that your display runs at its full refresh rate first with the refresh rate test.
  • Test each overdrive level; the best one often depends on the refresh rate.
  • Strobing modes (ULMB, ELMB, DyAc and similar) reduce blur but can lower brightness and add flicker.
  • OLED screens have almost no ghosting but still show sample-and-hold blur.

More display checks: monitor test, dead pixel test and FPS test. The home page lists every display test.

Fix guides for common problems

1 min

Frequently asked questions

What is a ghosting test?

It moves an object across the screen so you can see whether your monitor leaves a trail behind it. Trails come from pixels that change color too slowly, called ghosting, or from overdrive that pushes them too hard, called inverse ghosting.

How do I fix monitor ghosting?

Try your monitor's overdrive or response time setting. Medium is often best. If you see bright halos, step it down. Higher refresh rates and backlight strobing modes also reduce blur.

What is the difference between ghosting and motion blur?

Ghosting is a faint copy or trail. Motion blur makes the whole moving object look soft because your eyes track it while each frame stays still. A higher refresh rate reduces both; see is my monitor really running at 144 Hz.

Why do the lower lanes look jerky?

They update every second and every fourth frame on purpose, to show how the same speed looks at a half and a quarter of your frame rate.

Is this the same as other UFO-style tests?

It uses the same well-known idea, a moving object at a fixed speed, with its own original design.

Sources

  1. Wikipedia: Response time (technology)
  2. Wikipedia: Sample and hold motion blur

Written and tested by Kamel Medlej

Founder and editor of PC Hardware Tester. Tools are checked on real hardware, and each page says exactly what it was tested on. Spot a mistake? Tell us.

Last updated Published Tested on Chromium-based browser on Windows 11 with a 60 Hz IPS monitor, during development. Other browsers and displays are added here as they are checked.