Translate this page

Pages are written in English and translated in your browser by machine translation. Test results and your data are never sent anywhere.

Display

How to Check a New Monitor Before the Return Window Closes

Check a new monitor before the return window closes. A 10-step checklist for dead pixels, refresh rate, backlight bleed, banding, ghosting and ports.

By Updated 3 min read

A new monitor on a desk next to its open box
Test it now: Dead Pixel Test (full-screen colors to spot bad pixels)

The best time to check a new monitor is the day it arrives, while you can still return it. In about 45 minutes you can test for dead and stuck pixels, confirm the refresh rate, look for backlight bleed and uneven brightness, and check banding, ghosting, sharpness and every port. Here is the full checklist, with a free test for each step.

12 chapters · 2 min read

1. Inspect it before you plug in

1 min

Look over the screen at an angle under a light for scratches and pressure marks. Check the stand, the bezels and every port for damage. Keep the box and packing until you are sure you are keeping it.

2. Connect it properly

1 min

Use the cable that came with the monitor, plugged into your graphics card. Set the native resolution in your display settings and 100% browser zoom for the tests.

3. Set and confirm the refresh rate

1 min

Select the highest refresh rate in your system settings, then run the refresh rate test. If it shows 60 Hz on a high refresh monitor, follow is my monitor running at 144 Hz.

4. Hunt for dead and stuck pixels

1 min

Clean the screen, then run the dead pixel test full screen. Check black, white, red, green, blue and gray, slowly, row by row. A black dot on white is a dead pixel; a colored dot on black is stuck. See dead pixel vs stuck pixel for what each means for your return.

5. Let it warm up

1 min

Leave the monitor on with normal content for 15 to 30 minutes. Brightness and color settle as the backlight warms.

6. Check uniformity and backlight bleed

1 min

In the monitor test, open the dark gray, mid gray and black patterns in a dim room at your normal brightness.

  • Uneven patches or darker corners on gray are uniformity issues.
  • Light leaking in from the edges on black is backlight bleed.
  • A glow that changes as you move your head is IPS glow, normal for IPS panels.

Read backlight bleed explained to judge what is normal.

7. Check banding, gamma and shadow detail

1 min

Use the gradients pattern for banding, the gamma chart (2.2 is the usual target), and the shadow and highlight steps. If dark steps vanish into black, adjust brightness or the black level setting.

8. Check motion: ghosting and overdrive

1 min

Run the ghosting test. Try each overdrive level in the monitor menu and keep the one with the least trailing and no bright halos.

9. Check sharpness and text

1 min

Use the sharpness pattern. Lines should be crisp and text clear. Blurry text at native resolution can point to a scaling setting or, rarely, a faulty panel.

10. Test every port and feature

1 min

Connect to each HDMI, DisplayPort and USB-C input at least once, test the built-in speakers or headphone jack with the speaker test, and check USB hub ports if it has them.

What to do if you find a problem

1 min
ProblemTypical next step
Dead or bright pixel near centerReturn or exchange inside the window
Strong bleed visible in normal contentExchange
Can’t reach rated refresh rateCheck cable and settings; then contact support
Banding everywhereCheck color depth and profiles; then contact support
Physical damagePhotograph and contact the store immediately

Take photos of any fault with the test pattern visible. Find every display test on the home page.

Tools for this problem

1 min

Frequently asked questions

What should I check on a new monitor?

Dead and stuck pixels, the refresh rate, backlight bleed and uniformity, banding, color and gamma, ghosting, sharpness at native resolution, every input port, and physical damage. The checklist on this page covers each in order.

How long should a new monitor warm up before testing?

About 15 to 30 minutes, especially before judging uniformity and color. Pixel and port checks can be done right away.

Is some backlight bleed normal?

A little edge glow is common on LCD monitors, especially IPS panels, and visible mainly on black screens in a dark room. Strong patches visible in normal content are worth an exchange.

How long do I have to return a monitor?

It depends on the store and your country. Check the return policy on the day it arrives and test the monitor straight away.

Should I update monitor firmware?

If the maker offers an update that fixes a known issue, yes. Read the release notes first and never unplug during the update.

Sources

  1. Wikipedia: Defective pixel
  2. Wikipedia: Backlight
  3. Wikipedia: Gamma correction

Written and tested by Kamel Medlej

Founder and editor of PC Hardware Tester. Tools are checked on real hardware, and each page says exactly what it was tested on. Spot a mistake? Tell us.

Last updated Published