Dead Pixel vs Stuck Pixel - What Is the Difference?
Dead pixel or stuck pixel? Learn how to tell them apart with a full-screen color test, what can be fixed, and when to use your warranty or return window.
A dead pixel is black on every color because it never lights. A stuck pixel is lit all the time in one color (red, green, blue or white). You can tell them apart in seconds with a full-screen color test. Stuck pixels can sometimes be revived with a flashing fixer; dead pixels cannot, so check your warranty and return window.
How a pixel works
Each pixel on your screen is made of three subpixels: red, green and blue. On an LCD, each subpixel is a tiny shutter that lets backlight through or blocks it, controlled by a transistor. On an OLED, each subpixel makes its own light. A pixel shows white when all three are fully on and black when all three are off.
Faults happen at the subpixel level, which is why a “stuck pixel” is often only red, green or blue.
Dead, stuck and hot pixels compared
| Fault | Looks like | Best seen on | Fixable at home? |
|---|---|---|---|
| Dead pixel | Black dot | White screen | No |
| Stuck subpixel | Red, green or blue dot | Black or other colors | Sometimes |
| Hot pixel | White dot | Black screen | Sometimes |
| Partial subpixel | Slightly wrong tint | Gray and single colors | Rarely |
| Dust or smudge | Dot that moves when wiped | Any | Yes, clean it |
How to tell which one you have
- Clean the screen with a dry microfiber cloth. Dust is the most common false alarm.
- Open the dead pixel test and go full screen.
- On white, a black dot is a dead pixel.
- On black, a bright or colored dot is a stuck or hot pixel.
- On red, green and blue, a dot that is the wrong color shows which subpixel is stuck.
- Use your phone camera’s zoom as a magnifier on small, high-resolution screens.
Can you fix a stuck pixel?
Sometimes. A stuck subpixel may be a liquid crystal cell that is slow to respond. Rapidly switching it on and off can free it. The stuck pixel fixer flashes colors over a small area:
- Read the photosensitivity warning first.
- Move the flashing box over the pixel.
- Run it for 10 to 20 minutes, then check again.
- Repeat a few times over a day if the pixel changed at all.
It works on some pixels and not others. If nothing changes after about an hour in total, the fault is probably permanent.
Can you fix a dead pixel?
Not at home. A dead pixel usually has a failed transistor or a broken connection inside the panel. The fix is a replacement under warranty, or living with it if it is small and away from the center.
Pixel policies and warranties
Monitor makers publish pixel policies that say how many faulty pixels make a panel defective. Many use the classes from the ISO 9241-307 standard, which allow a small number of faults depending on the class. Some brands offer a zero bright dot or zero dead pixel promise for a limited time.
Practical advice:
- Check a new monitor immediately, while the store’s return window is open. See how to check a new monitor.
- Photograph the fault on a solid color, with the test’s color name visible.
- Note the position and whether it is dead or stuck; policies often treat bright dots more strictly.
Also inspect uniformity and bleed with the monitor test and read backlight bleed explained. Check your refresh rate with is my monitor running at 144 Hz. Every display test is on the home page.
Tools for this problem
- Dead Pixel Test: Full-screen colors to spot bad pixels.
- Stuck Pixel Fixer: Flashing colors to unstick a pixel.
- Monitor Test: Banding, bleed, gamma and sharpness.
Frequently asked questions
What is the difference between a dead pixel and a stuck pixel?
A dead pixel stays black on every color because it never lights. A stuck pixel stays one color, such as red, green, blue or white, because one or more of its subpixels never turns off.
Can a stuck pixel fix itself?
Sometimes. Stuck pixels occasionally recover with use, and the stuck pixel fixer flashes colors that can help. Dead pixels do not recover.
How do I find a dead pixel?
Clean the screen, then run the dead pixel test. Look for black dots on white and colored or white dots on black.
Is one dead pixel normal?
It can be within the maker's pixel policy, which sets how many faults are allowed. Many follow the ISO 9241-307 pixel fault classes. Check the policy and the store's return window.
Does pressing on a stuck pixel help?
It is sometimes suggested, but pressing on an LCD can damage it and may void the warranty. Try the software fixer instead.
Full Rig Check