The mouse DPI test measures how many counts your mouse sensor reports per inch of movement. Move the mouse a known distance along a ruler and the test does the math. It is useful for checking a new mouse, matching settings between mice, and setting up game sensitivity.
How to measure your mouse DPI
- Get a ruler. Put it flat on your desk or mouse pad. Pick cm or inches and a distance; 10 cm or 4 inches works well.
- Lock the pointer. Click the test box. The cursor disappears so it cannot hit the edge of the screen. Press Escape to unlock at any time.
- Line up. Put the edge of your mouse at the zero mark.
- Measure. Hold the left button, slide the mouse straight to the chosen mark, and let go.
- Repeat three to five times. The test averages your runs and shows the closest common setting.
How it works
With the pointer locked, the browser reports how far the mouse moved since the last event. In Chrome and Edge the test asks for unadjusted movement, which skips your system’s pointer speed and acceleration and gives raw sensor counts. Those counts are added up while you hold the button. Dividing the total by the distance in inches gives counts per inch, which is what DPI means for a mouse.
If your browser cannot provide raw movement, the readout says so, because system pointer settings will then change the number.
How to read your DPI result
| Readout | Meaning |
|---|---|
| Measured DPI | The average of your runs. |
| Closest common setting | The standard step nearest your result, such as 800 or 1600. |
| Run-to-run spread | How much your runs differ. Under 5% is a good measurement. |
| Raw input: No | System pointer speed is included; see the note under the results. |
A result within a few percent of your setting is normal sensor variation.
Tips for an accurate measurement
- Keep the mouse against the ruler’s edge so it moves in a straight line.
- Lift your eyes to the ruler mark, not the screen.
- On Windows without raw input, set pointer speed to the middle notch and turn off Enhance pointer precision.
- Measure each DPI step on your mouse if you want to map them all.
DPI terms in plain English
- DPI / CPI: counts the sensor reports per inch moved.
- eDPI: DPI multiplied by in-game sensitivity, used to compare setups.
- cm/360: how far you move the mouse for a full turn in a game.
- Acceleration: the system speeding the pointer up when you move fast.
Related tests: polling rate test, mouse test and the aim trainer. See every test on the home page.
Fix guides for common problems
- What DPI Should I Use for Gaming?: What DPI is best for gaming? Learn what DPI, eDPI and cm/360 mean, why many players use 400 to 1600 DPI, and how to measure your real mouse DPI.
- Mouse Polling Rate Explained (125 Hz to 8000 Hz): What mouse polling rate is, how 125, 500, 1000 and 8000 Hz differ in delay and CPU use, which rate to pick for gaming, and how to test yours online.
Full Rig Check