Mouse Polling Rate Explained (125 Hz to 8000 Hz)
What mouse polling rate is, how 125, 500, 1000 and 8000 Hz differ in delay and CPU use, which rate to pick for gaming, and how to test yours online.
Mouse polling rate is how many times per second your mouse reports its position and buttons to your computer. At 125 Hz it reports every 8 ms; at 1000 Hz, every 1 ms. A higher rate means slightly lower delay and smoother tracking, at the cost of a little more CPU work. For gaming, 1000 Hz is the sensible default.
How polling works
A USB mouse does not push data whenever it likes. The computer asks it for new data at a fixed interval, and the mouse answers with any movement and button changes since the last report. That interval is the polling interval, and its inverse is the polling rate.
| Polling rate | Interval | Worst-case extra delay | Average extra delay |
|---|---|---|---|
| 125 Hz | 8 ms | 8 ms | 4 ms |
| 250 Hz | 4 ms | 4 ms | 2 ms |
| 500 Hz | 2 ms | 2 ms | 1 ms |
| 1000 Hz | 1 ms | 1 ms | 0.5 ms |
| 4000 Hz | 0.25 ms | 0.25 ms | 0.125 ms |
| 8000 Hz | 0.125 ms | 0.125 ms | 0.0625 ms |
The step from 125 Hz to 1000 Hz removes up to 7 ms of delay. The step from 1000 Hz to 8000 Hz removes less than 1 ms.
Smoothness, not just delay
A higher rate also delivers movement in smaller pieces. On a 60 Hz screen, a 125 Hz mouse sends about two reports per frame, sometimes one and sometimes three, which can make cursor motion slightly uneven. At 1000 Hz each frame gets many reports, so movement is even. This matters more on high refresh displays: at 240 Hz, a 125 Hz mouse cannot even update every frame.
The cost of high polling rates
- CPU load: every report is processed by the system and often the game. At 4000 or 8000 Hz, older or busy CPUs can stutter.
- Battery: wireless mice at high rates drain faster.
- Compatibility: a few older games and tools behave oddly with very high rates.
If a game stutters after switching to 4000 or 8000 Hz, go back to 1000 Hz.
Which polling rate should you use?
| You are | Pick |
|---|---|
| Office user, any mouse | Whatever it ships with; 125 Hz is fine. |
| Gamer on a 60 to 144 Hz display | 1000 Hz. |
| Competitive gamer on 240 Hz or more with a fast PC | 1000 Hz, or try 2000 to 4000 Hz. |
| Wireless user who wants battery life | 500 to 1000 Hz. |
How to test your polling rate
- Open the polling rate test.
- Move the mouse fast in large circles inside the box for a few seconds.
- Read the highest steady rate and the likely setting.
The test uses raw pointer updates in Chrome and Edge, which come close to the mouse’s real report rate. Other browsers merge events between frames, which the test unpacks, but very high rates may still read lower than they are.
Common questions about polling problems
My mouse shows 125 Hz but should be 1000 Hz. Install the maker’s software and check the setting. Plug the mouse directly into the computer; some hubs and keyboard pass-through ports limit the rate.
Wireless mouse rate jumps around. Many wireless mice lower their rate when idle or on low battery. Move the receiver closer with an extension cable.
Cursor feels floaty. Check your display’s refresh rate with the refresh rate test and read is my monitor really running at 144 Hz. A display stuck at 60 Hz feels slower than any polling change.
Related: measure your sensor with the mouse DPI test, read what DPI to use for gaming, and check buttons with the mouse test. More tests on the home page.
Tools for this problem
- Mouse Polling Rate Test: Estimate your mouse report rate in Hz.
- Mouse DPI Test: Measure the DPI your mouse really sends.
- Mouse Test: Buttons, wheel and double-click faults.
Frequently asked questions
What is a good mouse polling rate?
1000 Hz is the standard for gaming mice and works well on any modern computer. 500 Hz is fine for most people. Office mice often run at 125 Hz, which is enough for everyday use.
Does polling rate affect input lag?
Yes, a little. The worst-case wait for a report is one interval, 8 ms at 125 Hz, 1 ms at 1000 Hz and 0.125 ms at 8000 Hz. The average wait is half that.
Is 8000 Hz worth it?
For most people the gain over 1000 Hz is hard to feel, and very high rates use more CPU and can cause stutter in some games. It can make sense on high refresh displays with a fast computer.
Why does my polling rate test show less than my setting?
Browsers can merge or cap events, wireless mice may lower their rate to save power, and the rate only appears while the mouse is moving. Move fast in circles and use Chrome or Edge.
How do I change my polling rate?
Use the mouse maker's software, a button on the bottom of the mouse, or a key combination listed in the manual. Generic mice usually have a fixed rate.
Full Rig Check