Translate this page

Pages are written in English and translated in your browser by machine translation. Test results and your data are never sent anywhere.

Mouse Polling Rate Test: How Many Hz?

Move your mouse in fast circles over the pad. The test reads event timing to estimate how often your mouse reports.

Runs locally in your browser. Nothing is uploaded.

– Hz

Move your mouse fast, in big circles, inside this box. Keep moving for a few seconds.

Results

Move the mouse in the box
Live estimate–Hz
Highest steady rate–Hz
Likely setting–
Event sourceMove events

Browsers can cap or merge events, so rates above 1000 Hz may not be measurable in every browser, and a slow page or a busy computer lowers the reading. Wireless mice may drop their rate to save battery. The result is the median of the gaps between reports while you move, snapped to the closest common setting.

The polling rate test estimates how many times per second your mouse reports its position to your computer. Move the mouse quickly inside the box and the test measures the gap between reports, then snaps the result to the closest common setting such as 125, 500 or 1000 Hz.

5 chapters · 2 min read

How to test your polling rate

1 min
  1. Move your pointer into the box.
  2. Move the mouse quickly in large circles and keep going for a few seconds. Stopping or moving slowly sends fewer reports.
  3. Watch the live estimate. It settles after a moment.
  4. Read the highest steady rate and the likely setting.
  5. Change your mouse’s polling setting in its software and test again to compare.

How it works

1 min

A USB mouse sends a report each time the computer polls it, as long as it has moved. The browser turns those reports into pointer events. In Chrome and Edge, the test listens to raw pointer updates, which arrive close to the rate the mouse reports. In other browsers it uses coalesced events, which recover the reports the browser grouped together between frames.

From each event’s timestamp the test works out the gaps between reports, takes the median of the recent gaps (which ignores occasional hiccups), and converts it to hertz. The histogram shows the spread: a 1000 Hz mouse forms a tall bar near 1 ms.

How to read your result

1 min
Likely settingReport intervalTypical use
125 Hz8 msOffice mice, default for many basic mice.
250 Hz4 msSome wireless mice in power saving.
500 Hz2 msMany gaming mice in balanced mode.
1000 Hz1 msStandard for gaming mice.
2000 Hz and above0.5 ms or lessHigh-end mice; may be capped by the browser.

If the result is far below your setting, check the notes below the readouts. Browsers and busy systems can lower what is measurable.

Tips

1 min
  • Plug wired mice directly into the computer, not a keyboard or monitor hub.
  • Keep wireless receivers close, ideally with an extension cable on the desk.
  • Close other tabs and apps; a loaded system delays events.
  • High polling rates use more CPU; if games stutter at 4000 or 8000 Hz, try 1000 Hz.

Related tests: mouse DPI test, mouse test and keyboard tester. The home page lists every test.

Fix guides for common problems

1 min

Frequently asked questions

How do I check my mouse polling rate?

Move the mouse fast in circles inside the test box for a few seconds. The test measures how often your mouse reports its position and shows the result in hertz, along with the closest common setting.

What is a good mouse polling rate?

1000 Hz is standard for gaming mice and reports every millisecond. 500 Hz is fine for most people. Office mice often use 125 Hz. Higher rates such as 4000 or 8000 Hz exist but need a fast computer and are hard for browsers to measure.

Why does the test show a lower rate than my mouse setting?

Browsers may merge or cap events, a busy computer can delay them, and wireless mice may lower their rate to save power. Use Chrome or Edge for the most detail, close other apps, and move continuously.

Can a browser measure 4000 or 8000 Hz?

Sometimes. Chrome and Edge expose raw pointer updates that can reveal high rates, but limits in the browser and system often cap the reading below the true rate.

Does polling rate affect input lag?

Yes, slightly. At 125 Hz a report can wait up to 8 ms; at 1000 Hz, up to 1 ms. Read mouse polling rate explained.

Sources

  1. MDN Web Docs: PointerEvent.getCoalescedEvents()
  2. MDN Web Docs: pointerrawupdate event
  3. USB-IF: Human Interface Devices (HID)

Written and tested by Kamel Medlej

Founder and editor of PC Hardware Tester. Tools are checked on real hardware, and each page says exactly what it was tested on. Spot a mistake? Tell us.

Last updated Published Tested on Chromium-based browser on Windows 11 with a 1000 Hz wired gaming mouse, during development. Other browsers and mice are added here as they are checked.