A controller tester shows, live, every button press, trigger pull and stick movement your gamepad sends to your computer. This one also measures stick drift, checks how round each stick’s range is, and tests vibration, so you can find a faulty controller before it costs you a match or a return window.
How to use the controller tester
- Connect the controller with a USB cable or pair it over Bluetooth.
- Press any button. Browsers reveal a controller only after a button press.
- Press each button once. It flashes cyan while held and stays tinted once tested. The counter shows how many are left.
- Pull both triggers slowly. The bars at the top should rise smoothly from 0 to 100%.
- Move each stick in circles and to each edge. The knob on the drawing follows it.
- Let go of both sticks and press Measure stick drift. Keep your hands off for three seconds.
- Press Circularity: left, rotate the left stick slowly around its edge a few times, then do the right.
- Press Test vibration to feel both rumble motors.
How the controller test works
The page reads your controller through the browser’s Gamepad API once per screen refresh. Each read returns every button as pressed or not plus an analog value between 0 and 1, and every stick axis as a number from -1 to 1. Controllers that use the standard mapping put buttons in a fixed order, which is how the test can name them A, Cross, LB or L1.
Stick drift is measured by recording both sticks while you do not touch them and reporting the largest distance from center. Circularity splits the stick’s range into 72 directions and keeps the furthest point reached in each. Dead zone overlay draws a dashed circle so you can see how a game’s dead zone would hide small drift.
How to read your results
| Result | What it means | What to do |
|---|---|---|
| Every button tinted | All buttons register. | Nothing. |
| A button never lights | No signal from that button. | Try another cable or connection; if it persists, the button or its contact is faulty. |
| Idle drift under 0.08 | Sticks rest close to center. | Nothing. |
| Idle drift 0.08 to 0.24 | Slight drift; small dead zones may show it. | Clean the stick, recalibrate, or raise the in-game dead zone. |
| Idle drift above 0.24 | Most games will see movement. | See the stick drift fix guide; consider warranty or repair. |
| Trigger stops below 100% | The trigger does not reach full travel. | Check for trigger stops or debris; recalibrate. |
The drift bands and their source are on the methodology page.
Common controller problems and fixes
Not detected. Press a button after connecting. Quit Steam, which can take exclusive control, and reload. Try a different USB cable, since many only charge. Our guide on controllers not detected in Steam covers Steam Input settings.
Buttons are in the wrong place. Generic or older pads may not use the standard mapping. The test then shows raw button numbers, which is still enough to check that each one works.
Drift appears only sometimes. Drift often gets worse when the controller is warm or after the stick is pushed hard. Measure several times.
Bluetooth disconnects. Keep the controller within a few meters, charge it, and avoid USB 3 ports right next to the Bluetooth adapter, which can cause interference.
Controller terms in plain English
- Stick drift: the stick reports movement while nobody touches it.
- Dead zone: a small area around center that a game ignores, to hide drift.
- Standard mapping: a fixed button order browsers use for common controllers.
- Circularity: how evenly a stick reaches its edge in every direction.
- Rumble: vibration from small motors inside the grips.
Testing a specific pad? Use the PS5 controller tester or the Xbox controller tester. For the rest of your setup, see the keyboard tester and the home page.
All product names are the property of their owners. This site is not affiliated with or endorsed by Sony, Microsoft or Nintendo, and the controller drawing is an original generic design.
Fix guides for common problems
- How to Fix Controller Stick Drift: Fix controller stick drift on PS5, Xbox and PC. Measure drift online, then try cleaning, recalibration, dead zones, firmware and stick replacement, in order.
- Controller Not Detected in Steam? How to Fix It: Steam not detecting your Xbox, PlayStation or generic controller? Test it in the browser, then fix Steam Input, drivers, cables, Bluetooth and game settings.
- What Is a Controller Dead Zone and How Should You Set It?: A controller dead zone is the area around center a game ignores. Learn inner and outer dead zones, shapes, sensible values, and how to set yours.
Full Rig Check