Translate this page

Pages are written in English and translated in your browser by machine translation. Test results and your data are never sent anywhere.

Double Click Test: Catch a Mouse That Double Clicks

Click once at a time, slowly. If the mouse registers two clicks for one press, the gap shows in red with its timing.

Runs locally in your browser. Nothing is uploaded.

Click normally, one click at a time, at a steady pace. A worn switch sometimes sends two clicks for one press.

  • Left0
  • Middle0
  • Right0
  • Back0
  • Forward0
  • Wheel up0
  • Wheel down0

Results

Click the left button about 30 times
Buttons tested0/ 5
Double click faults0
Shortest gap–
Wheel up / down0 / 0
Wheel jumps0

Back and forward often do nothing on Mac trackpads and some mice unless their software is installed. On Linux, some desktops take the middle button for pasting. Precision touchpads send scroll as many small steps, so "jumps" are only meaningful with a notched wheel.

Report a problem

The double click test finds a mouse that sends two clicks when you press once. Click normally, one click at a time, and the test flags any pair of clicks closer together than a person could make. A chart of the gaps between your clicks shows how often it happens.

5 chapters · 2 min read

How to run the double click test

1 min
  1. Move your pointer into the test area.
  2. Click the left button about 30 times at an even pace, one click at a time. Do not double click on purpose.
  3. Watch Double click faults. Any number above zero is a sign of switch bounce.
  4. Look at the time between clicks chart. Your normal clicks form a cluster; faults appear as a separate bar near zero.
  5. Test the right and middle buttons too if they misbehave.

You can change the fault threshold in the tool bar. The default is 80 ms.

How it works

1 min

The test records the exact time of every button press using the browser’s event timestamps. For each click it measures the gap since the previous click of the same button. When a switch bounces, it produces a second press just a few to a few dozen milliseconds after the first, far faster than human double clicks, which usually take well over 100 ms.

How to read the results

1 min
ResultMeaningWhat to do
0 faults over 30+ clicksThe switch is fine.Nothing.
1 or 2 faultsEarly wear or dust.Clean and retest over a few days.
Frequent faultsA worn switch.Raise debounce if available; plan a switch repair or replacement.
Faults only when clicking hardA weak spring in the switch.Same as above.

The 80 ms threshold is a reasoned default, explained on the methodology page.

Fixes to try

1 min
  1. Blow out the switch. Use compressed air around the button edge while clicking.
  2. Raise debounce. Gaming mouse software often has a debounce or click delay setting. A few milliseconds more can hide bounce.
  3. Update firmware. Some mice have fixed double-click issues in firmware.
  4. Replace the switch. A repair shop can swap a micro switch in minutes, or the maker may replace the mouse under warranty.

Our full guide, how to fix mouse double clicking, covers each step with Windows and macOS settings.

Check the rest of your mouse with the main mouse test and the CPS test. The home page lists every test.

Fix guides for common problems

1 min

Frequently asked questions

How do I test if my mouse double clicks?

Click the left button normally, one click at a time, about 30 times. If the test reports any fault, your mouse sent two clicks for one press. The event log shows the gap in milliseconds.

What causes a mouse to double click?

Most often a worn or oxidized micro switch whose metal contact bounces when pressed. Dust, a damaged spring inside the switch, or very low debounce settings can cause it too.

What double click threshold should I use?

The default is 80 ms. Deliberate double clicks are much slower than that, so faults below it are almost always the switch. You can raise it to catch borderline cases, but you may then flag your own fast clicking.

Can a double clicking mouse be fixed?

Often temporarily by cleaning and by raising debounce in the mouse software. A lasting fix is replacing the micro switch, or a warranty replacement. See fix mouse double clicking.

Is it my mouse or my computer setting?

If Windows is set to single-click to open items, it can feel like double clicking. This test measures the raw clicks, so faults here are the mouse itself.

Sources

  1. MDN Web Docs: MouseEvent.button
  2. MDN Web Docs: Event.timeStamp

Written and tested by Kamel Medlej

Founder and editor of PC Hardware Tester. Tools are checked on real hardware, and each page says exactly what it was tested on. Spot a mistake? Tell us.

Last updated Published Tested on Chromium-based browser on Windows 11 with a wired mouse, during development. Other browsers and mice are added here as they are checked.